Feb 18, 2022 Deixe um recado

Como testar um carregador de gotejamento

Como testar um carregador de gotejamento

Os carregadores de gotejamento são usados ​​para carregar com segurança baterias automotivas e outras. Os carregadores têm pelo menos um medidor como parte dos controles. Os medidores podem indicar a quantidade de amperes que flui do carregador para a bateria (amperímetro) e a tensão fornecida pela bateria (voltímetro). Use esses medidores para testar o carregador de gotejamento.


Passo 1

Connect the trickle charger to the battery and monitor any gauges on the trickle charger. Look for identifying labels such as "Ammeter" and "Voltmeter."

Passo 2

Read the setting on the ammeter. There may be a gradated scale on the meter. This meter indicates that the trickle charger is sending power to the battery and that the trickle charger works. Indications such as "Charge" mean the trickle charger is sending low, safe amps to the battery. "Start" is found on combination trickle chargers/vehicle starters and indicates high amps are being sent. In any case, any movement in the ammeter needle from zero indicates the charger is working.

Olhe para o voltímetro. Ele lhe dirá quantos volts estão disponíveis na bateria. O movimento desta agulha ao longo do tempo indica que o carregador de gotejamento está realizando seu trabalho. Por exemplo, se o voltímetro mostrar 6v no início do dia e 12v no final, você sabe que ocorreu o carregamento. Os voltímetros geralmente funcionam com o carregador ligado ou desligado.


Enviar inquérito

Casa

Telefone

Email

Inquérito